Mon–Fri 7:00am–6:00pm · 24/7 emergency service

Call us: 866 344 8295

Commercial plumbing, built around the construction schedule

Six areas of plumbing work for tenant improvements and build-outs — each planned so the underground, the inspections and the long-lead equipment stay off the critical path.
Home  /  Services
Plumber on a ladder installing overhead copper piping during a commercial office retrofit - Commercial Plumbing Retrofits, call 866 344 8295
SERVICE 01

Underground & rough-in

Trenched sanitary and vent piping set to grade with correct slope and cleanouts, in-wall water and gas rough-in, and above-ceiling mains and risers routed clear of structure, ductwork, electrical and fire sprinkler. Everything on test before it is covered.
Schedule note: the underground gates the slab pour and the rough-in gates drywall. We confirm fixture and equipment locations before we trench, and we book the inspection the moment the system is on test.
Two plumbers on ladders running overhead piping above an open-plan office fit-out - Commercial TI Plumbing, call 866 344 8295
SERVICE 02

Domestic water & water heaters

Hot and cold water distribution, recirculation loops, pressure-reducing and mixing valves, and water heating — tankless, storage tank, or point-of-use — sized to the fixture demand and the tenant’s hours of use.
Schedule note: commercial water heaters and large mixing assemblies can be long-lead. We select and release them off the preliminary fixture schedule so they are on site for trim.
Plumber connecting a wall-hung lavatory in a commercial restroom build-out - Commercial Restroom TI, call 866 344 8295
SERVICE 03

Fixtures, trim & ADA restrooms

Fixture setting and trim-out for restrooms, break rooms, janitor and utility spaces, plus ADA-compliant restroom layouts — clear floor space, fixture heights, grab-bar backing, and insulated or offset piping under accessible lavatories.
Code note: a tenant improvement that alters a restroom often triggers a full accessibility upgrade. We flag that at the walkthrough so it lands in the design set, not at inspection.
Two plumbers reviewing drawings on site during a commercial plumbing tenant improvement - Plumbing Tenant Improvements, call 866 344 8295
SERVICE 04

Grease interceptors & food-service

Interior hydromechanical and exterior in-ground grease interceptors sized from the kitchen equipment schedule, floor sinks and floor drains, indirect waste, and the connections for three-compartment sinks, dishwashers and pre-rinse stations.
Permit note: grease-interceptor plans usually route through the sanitation district on a separate review clock. We submit it in parallel with the building permit so the approvals land together.
solana beach plumbing scope - What to Include in Your Project Scope
SERVICE 05

Backflow & gas piping

Backflow prevention assemblies for domestic, irrigation, boiler and process water, with certified initial testing and the paperwork the water purveyor requires. Plus fuel-gas piping and connections for kitchen equipment, water heaters and rooftop units.
Schedule note: backflow assemblies and their enclosures can be long-lead, and the purveyor’s test acceptance is a gate on occupancy. We handle both early.
San Gabriel plumbing estimate covering kitchen floor trenches
SERVICE 06

Permits, inspections & sign-off

Permit-ready plumbing drawings, isometric diagrams, drainage and water fixture-unit calculations, and a managed inspection schedule from underground through final. We keep the inspector’s correction list at zero wherever possible and tie the plumbing final to your certificate of occupancy.
Why it matters: plumbing inspections are hold points — the slab does not pour and drywall does not hang until they pass. We schedule each one against a provable milestone.
EVERY ESTIMATE

What every estimate includes

A line-item scope

Underground, rough-in, water heating, fixtures, gas and specialty equipment broken out separately, with allowances marked.

A code read

What the restroom, grease and backflow scope triggers under the current adopted code and the local authority.

A long-lead list

Every interceptor, water heater and backflow assembly with its lead time and the date it must be ordered.

Get the plumbing priced

Send drawings or a scope summary and your target date. We turn most estimates around in three business days.